Auger Conveying / Gravity Fed Filler utilizing rugged construction for long life with low maintenance.  Its versatile hopper design and a variety of filling screw options handle a wide range of products. 

Product entering the bagger passes through the gear driven agitator section and into the filling screw which conveys it into the bag, drum, pail, or box.  When the preset weight is reached, the bagger stops and momentarily reverses to halt the flow of product.

Bagger to normally fill 20lb to 110lb bags, buckets, or boxes with proper filling head/spout.  Material should be free-flowing, ranging from fine powders to coarse blends.  This bagger was designed to suit low head-room installations.  With proper considerations, bagger may be fed directly from customer's blender, stationary bing, or from tote bin/super sack supported above bagger.  If bagger is fed directly from a blender, some sort of isolation device may be necessary at the bagger in-feed to isolate the bagger from product flow surges.

​

Bagger is simultaneous fill and gross weigh design.  Valve bags will be weighed on the bagger's integral 150lb capacity scale.  Operator places the empty bag on the fill spout and starts the bagger.  Bagger fills the bag to a predetermined weight.  Operator removes the filled bag.

Production rate is dependent upon the product density, particle size, and bag valve size.  Typical filling rate for an installation bagging products having 35-40 PCF density, 20 mesh to 100 mesh particle size, and a bag valve at least 5 1/2" size, would be 7 to 9 seconds for a 50lb bag, and 14 to 17 seconds for a 100lb bag.  Allow another 4 to 6 seconds for the operator to remove the filled bag, place an empty bag, and re-start the bagger.